AI passenger flow counting terminal

AI Intelligent Passenger Counting Terminal adopts video camera with AI deep learning algorithm and edge computing. It can collect passenger flow data and video data, and upload passenger flow data to the comprehensive passenger flow management platform. Technical requirements are as follows: 1. Support WEB operation for convenient system configuration and parameter adjustment. 2. Support Chinese and English display. 3. Start counting upon receiving door-open signal and stop counting when door closes. 4. Support entry/exit passenger counting for single door simultaneously. 5. Support entry/exit passenger counting for double doors simultaneously. 6. Configurable resolution: 720P (1280*720) and 1080P (1920*1080). 7. Support true-color imaging; video wide dynamic range adapts to image requirements under various vehicle operating environments. 8. Built-in low-light supplementary lighting function. 9. Bracket supplied by vendor for installation on various vehicle models with adjustable mounting angle. 10. Multiple control modes: wireless remote control, APP control, etc. 11. Built-in WiFi. Parameters can be viewed, configured and debugged via APP for easy installation and commissioning. 12. Support remote video recording download, network time synchronization, parameter configuration and remote firmware upgrade. 13. Real-time passenger flow analysis and statistics; passenger counting accuracy ≥95%. 14. ≥2 I/O acquisition channels for collecting door open/closed status, supporting level or pulse signal. 15. 4G full-network communication, backward compatible with 3G/2G. 16. Dual-mode positioning: GPS + BeiDou. 17. Built-in edge computing power to support multi-channel intelligent video applications. 18. Built-in TF card storage, maximum capacity ≥256GB. 19. ≥1 RS485 serial port for connecting to vehicle dispatching host to synchronize route and stop information. 20. ≥1 LAN port to connect to third-party vehicle router for network access. 21. Video output interface, ≥1 RTSP video stream output. 22. Ingress protection rating ≥IP65. 23. Power consumption ≤12W. 24. Vehicle anti-vibration design, compliant with GB/T 2423.10-2019 vibration test: 1. Frequency: 5Hz~55Hz~5Hz 2. Amplitude: 0.15mm 3. Axis: X, Y, Z 4. Cycles: 1 sweep per axis 5. Sweep rate: 1 Oct/min